430MM Clutch Disc Plate for XKT136 XCMG-manufacture,factory,supplier from China

Product detailsThe clutch is an important component required in the vehicle transmission system, and the automobile clutch driven plate is an important wear component of manual transmission cars.

Product descriptionThe automobile clutch driven plate is an indispensable wearing part for manual transmission cars. It transmits the engine torque to the transmission through friction conversion, reduces the vibration and impact of the transmission system, and completes the "disengagement" and "engagement" tasks. The clutch driven plate is mainly composed of driven plate, driven plate hub, friction plate and other parts. They work together to provide smooth and stable performance and make the clutch work efficiently.1.

The clutch has three main functions: Ensure the car starts smoothly. This is the primary function of the clutch. Before the car starts, it is natural to start the engine. When the car starts, the car gradually accelerates from a completely stationary state. If the drive train (which connects the entire car) is rigidly connected to the engine, the car will suddenly rush forward as soon as the transmission is put into gear, but it will not start.Prevent the overload of the transmission system.

Product descriptionThe clutch plate is an important part of the clutch. The clutch plate is a round steel plate. They are usually made of friction material attached to the engine crankshaft. The function of the clutch plate is to transmit the engine's power to the gearbox.1. Clutch structure: The clutch is mainly composed of control part, transmission part, contacts, friction plates and other parts. These work together to enable the clutch to work efficiently.2.

Product descriptionThe clutch plate is an important part of the clutch. It is a round steel plate. These are usually made of friction material that is attached to the engine's crankshaft. The purpose of the mounting plate is to transfer engine power to the gearbox. When releasing the clamp, the mounting plates stick together due to friction and rotate together. In this way, the power from the engine is transferred through the pressure plate to the transmission, propelling the vehicle forward.

Product DetailsAs a component in power transmission The clutch has three important functions: "transmitting power," "cutting power," and "preventing overload." The drive plate is also known as the rear pressure plate. Apply force on the clutch friction plate from behind. This causes the friction plate to move forward slightly and presses on the drive plate (front thrust plate, flywheel) to transmit power. A car's clutch transmission plate is another component of the clutch. It transmits engine torque to the transmission through friction conversion.

Product description Withstand Pressure: The clutch pressure plate takes the strain from the seize strain plate spring and transmits it between the grab disc and flywheel to make sure the applicable operation of the clutch.Metal Material: Clutch stress plate is normally made of excessive electricity steel material, such as metal or aluminum alloy, to make sure adequate energy and durability.Friction surface: The grasp stress plate commonly has a friction floor that serves to make contact with the grasp disc to furnish friction so that the snatch disc can desirable contact and disengage from the

Product descriptionA clutch is similar to a switch, engaging or disengaging power transmission. The active part and the driven part of the clutch mechanism can be temporarily separated, and can be gradually connected, and may also rotate relative to each other during the transmission process. There cannot be a rigid connection between the driving part and the driven part of the clutch.

Product descriptionCeramic brake pads use high-tech materials such as large-grain graphite/brass/high-grade ceramics (non-asbestos) and semi-metals, which have the advantages of high temperature resistance, wear resistance, stable braking, repair of brake discs, environmental protection, no noise and long service life. Excellent material properties, overcoming the material and process defects of traditional brake pads, it is the most cutting-edge advanced ceramic brake pad in the world.

Detailed introduction of clutch driven plate:1. Principle: The clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed on the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the gearbox. While the car is driving, the driver can depress or release the clutch pedal as needed to temporarily separate and gradually connect the engine and the transmission to cut off or transmit the power input from the engine to the transmission.2.

Features of Clutch Disk For XCMG XKT136There are 6 corrugated spring steel plates around the driven plate steel plate, and 6 window holes are evenly arranged on the corrugated spring steel plate. The driven plate steel plate communicates with the first friction lining and the second friction lining respectively through the window holes.

The driven plate assembly is mainly composed of friction plate, driven plate, shock absorber and spline hub. The driven plate has a great influence on the working performance of the clutch and should meet the following design requirements:1. The moment of inertia should be as small as possible to reduce the impact between gear teeth when the transmission is shifting.2. It should have axial elasticity to make the clutch engagement smooth and easy to start, and to make the pressure on the friction surface uniform and reduce wear.3.

Product descriptionAs a component that transmits power, the clutch has three important functions: "transmitting power", "cutting off power" and "preventing overloading". The driven plate, also called the rear pressure plate, exerts force on the clutch friction plate from the rear, making the friction plate slightly Move forward and compress the driving plate (front pressure plate, flywheel) to transmit power.The driven disc is necessary for thermal pressure equalization of the clutch.

Product descriptionThe clutch drive plate mainly consists of the drive plate, drive plate hub, friction plate and other parts.1. The material of the driven parts is related related to the structural model used2. Followers without wave spring blades usually It is forged from high carbon steel or spring hardened parts and has been heat treated to provide This meets the hardness requirements.3. When using a wave spring plate, the follower should be made of Low carbon steel and corrugated parts should be made. from spring steel4. Drive disc hubs are generally made of 26-32HRC cast iron.5.

Product description The seize disc is an necessary section of the clutch. It is a round steel disc, normally made of friction material, installed on the crankshaft of the engine. The function of the seize plate is to transmit engine strength to the transmission.When the grasp pedal is released, the friction between the seize plate and the grab power plate will purpose them to come into shut contact and rotate together.

Product descriptionThe clutch is located in the flywheel housing between the engine and gearbox. The clutch driven plate is mainly composed of a driven plate body, a friction plate and a driven plate hub. Specifically, it can be said that it is composed of four parts: driven steel plate, friction plate, torsion damper, and driven disc hub. Driven steel plate: The driven steel plate is riveted to the torsional shock absorber disc, and the driven disc hub is sandwiched between them. Friction plate: transmits torque.

Product descriptionTorque Capacity: The clutch disc's torque ability need to be capable to manage the engine's strength output. Higher torque potential is required for high-performance motors with greater effective engines.Reliability and Durability: The clutch disc ought to be designed to stand up to repeated engagement and disengagement besides immoderate put on or degradation.

Product DescriptionThe clutch plate requires a certain amount of friction to transmit enough power. At the same time, it is also required to have certain wear resistance and high temperature resistance to ensure long-term reliability.The performance and overall performance of the clutch plate directly affect the operating effect and life of the clutch. Therefore, when using and maintaining the clutch, pay attention to the wear degree and condition of the clutch plate.

Product detailsThe clutch is installed between the engine and the transmission. It is a component in the transmission system that is directly connected to the engine. It is responsible for engaging and cutting off the power transmission between the engine and the transmission. The basic requirements for the clutch are: the active part and the driven part can be temporarily separated, and can be gradually connected, and relative slip may occur during the transmission process. Its specific functions are as follows.1. Ensure the car starts smoothly.

Product detailsThe clutch pressure plate is one of the most important components of the clutch assembly. And the function of the clutch plate plays an important role in vehicle driving safety. Depending on the driver's needs, engine power is transmitted or disconnected via mechanical linkages. The car starts smoothly in conjunction with the clutch plate. Smooth gear changes Prevents the engine from overworking Spring friction clutches (friction clutches for short) are widely used in clutch disc brakes.

Product detailsThe clutch drive plate is a precision mechanical device that controls and regulates engine power. Clutch transmission plates are widely used in automobiles. motorcycle and other mechanical equipment Generators, etc. are mainly used to control engine output. It converts engine power into vehicle movement, starting, stopping, driving and accelerating the engine. This is to ensure the safe operation of machinery and equipment.

Product descriptionThe car's clutch driven plate is another component of the clutch. It transmits the engine torque to the transmission through friction conversion, reducing vibration and impact of the transmission system, and completing the tasks of "cutting" and "inserting". The automobile clutch driven plate is an essential wear part for manual transmission cars. The clutch driven plate hot pressing leveling equipment physically deforms the material under constant temperature and constant pressure conditions, and finally achieves the leveling of the driven plate.

Product detailsThe clutch is an important component required for a car's transmission system. The structure and working principle include a controller. Power transmission parts, contacts, friction plates, etc. The clutch works more efficiently when they work together.The role of powertrain components: Powertrain components transmit power from the engine to the transmission. and recognize gear changes in the transmission systemContact Function: Contact function is to connect the powertrain components to the powertrain.

Products DescriptionSmooth surface without burrs.All over the world.Factory direct sales.Professional after sales.High strength and uniform force SpecificationProduct NameClutch CoverCertificateIATF16949:2016Place of Origin Shandong,ChinaWarranty12 MONTHSLogistics port Shanghai/Ningbo/QingdaoTruck Model XCMG,LCMG,SDLG,SANY,LiuGong,TONLY,CNHTCSupply Ability120000 Sets/MonthClutch Cover SizeStandardQuality100% Professional TestClutch Disc SizeOE StandardBrand NameLHweight30 kgPackageStandrad PackageConditionNewHow to make offer:Provide OE Number, Tech