Carbon Material Brake Pad-manufacture,factory,supplier from China

Product descriptionThe working principle of brakes mainly comes from friction. It uses the friction between brake pads and brake discs (drums) and tires and the ground to convert the kinetic energy of the vehicle into frictional heat energy to stop the vehicle.

Product descriptionCar brake pads, also called car brake pads, refer to the friction material fixed on the brake drum or brake disc that rotates with the wheel. The friction linings and friction pads bear external pressure and generate friction to achieve vehicle deceleration. Purpose.Automobile brake pads are generally composed of steel plates, adhesive insulation layers and friction blocks. The steel plates must be painted to prevent rust.

Product descriptionThe basic working principle of brakes is friction. It uses the friction between the brake pads, brake discs (drums), tires and the ground to convert the friction energy of the vehicle into friction heat energy to stop the vehicle. A good, effective braking system must be able to provide strong, sufficient, controlled braking force, and have sufficient fluid transfer and heat dissipation to ensure that the driver's energy is exerted from the brake pedal, allowing the vehicle owner to fully and efficiently contact the cylinder. and sub-cylinders for each cylinder.

Product descriptionWith good mechanical strength and physical properties, friction material products need to be drilled, riveted, assembled and other mechanical processing before being assembled and used to make a brake pad assembly or clutch assembly. During the friction work process, the friction material not only has to withstand high temperatures, but also withstands large pressure and shear forces. Therefore, friction materials are required to have mechanical strength to ensure that they will not be damaged or broken during processing or use.

Product descriptionCeramic brake pads use high-tech materials such as large-grain graphite/brass/high-grade ceramics (non-asbestos) and semi-metals, which have the advantages of high temperature resistance, wear resistance, stable braking, repair of brake discs, environmental protection, no noise and long service life. Excellent material properties, overcoming the material and process defects of traditional brake pads, it is the most cutting-edge advanced ceramic brake pad in the world.

Product descriptionCeramic brake pads are a new type of friction material. Ceramic brake pads are composed of ceramic fibers, iron-free filler substances, adhesives and a small amount of metal. They have the characteristics of no noise, no dust, and no corrosion of the wheel hub. , long service life, environmental protection and other advantages. Ceramic brake pads are the latest brake pad technology, which have better characteristics than traditional brake pads. Ceramic brake pads are currently only used in some high-end cars or sports cars. Ceramic brake pads change conventional wisdom.

Product description The clutch driven plate mainly includes driven plates, driven plate hubs, friction plates and other parts.1. The material of the driven piece is related to the structural form used.1. The driven piece without a wave spring piece is generally stamped from high carbon steel or spring rigid piece, and meets the hardness requirements after heat treatment.2. When using wave spring sheets, the driven piece should be made of low carbon steel and the corrugated piece should be made of spring steel.2.

Product descriptionCarbon fiber clutch facing refers to clutch facings that are made primarily or entirely from carbon fiber materials. Carbon fiber clutch facings are commonly used in high-performance applications, such as racing cars, sports vehicles, and heavy-duty industrial machinery. However, they may come with a higher price tag compared to other types of clutch facings.

Product descriptionThe clutch drive plate mainly consists of the drive plate, drive plate hub, friction plate and other parts.1. The material of the driven parts is related related to the structural model used2. Followers without wave spring blades usually It is forged from high carbon steel or spring hardened parts and has been heat treated to provide This meets the hardness requirements.3. When using a wave spring plate, the follower should be made of Low carbon steel and corrugated parts should be made. from spring steel4. Drive disc hubs are generally made of 26-32HRC cast iron.5.

Product descriptionThere is a friction plate on the clutch pressure plate, just like the brake pad on the wheel. It is made of very wear-resistant asbestos and copper wire. The friction plate on the pressure plate also has a minimum allowable thickness. After driving for a long time, the friction plate on the pressure plate will The friction plates also need to be replaced. It used to be that you could buy spare parts and replace the friction plates yourself. Now you buy the pressure plate sub-assembly with the friction plates already installed.

Product descriptionWhen the clutch is closed, power can be transferred from the engine to the transmission and drive wheels. Clutch linings ensure that the gears do not rub against each other during this process and provide flexibility and support. Due to the pressures and extreme conditions that often occur in engines, especially at constant high speeds, wear and tear on surfaces inevitably occurs.

Product descriptionCeramic brake pads have greater braking capacity than traditional brake pads and are also very lightweight. Of course, its biggest feature is high temperature resistance and wear resistance, and ceramic brake pads improve braking performance. Ceramic brake pads can be used at temperatures up to 1000°C for a long time and can meet the high performance requirements of various high-performance braking materials. For example, in F1 racing cars, the brake pads are all brake pads with ceramic components.

Product descriptionComposite yarn take hold of facings are grab facings that are made of composite yarn materials. Composite yarn grab facings are frequently regarded extra environmentally pleasant in contrast to typical asbestos-based grab facings. They do now not comprise hazardous substances and have low toxicity, making them safer to use and dispose of.

Product descriptionThis enables the engine and transmission to gradually engage, thereby ensuring a smooth start of the car. Temporarily disconnects the engine from the transmission to facilitate shifting and reduce shift shock.

Product description The brake disc is an important part of the clutch. This is a round steel plate, usually made of friction material, that is attached to the engine's crankshaft. The purpose of the plywood is to transmit engine power to the gearbox. When the clamp is released, the friction between the mounting plate and the power plate causes them to stick together and rotate, and the engine power is transmitted to the transmission through the pressure plate. Let the car move forwardThe transmission plate is one of the important parts of the clutch.

Product descriptionComposite yarn clutch facings are clutch facings that are made of composite yarn materials. Composite yarn clutch facings are often considered more environmentally friendly compared to traditional asbestos-based clutch facings.

Product descriptionThe dump truck ceramic clutch is a new type of metal-ceramic automobile clutch driven disc, which belongs to the field of automobile brake control technology. The driven plate includes cermet friction plate, driven plate, shock absorber spring, damping plate, driven plate hub and rod compression spring. Ceramic clutches perform better in terms of overload capacity compared to clutches made of other materials. The main reasons are as follows: 1. Different material strengths: Ceramics is a high-strength material.

Product descriptionThe dump truck ceramic clutch is a new type of metal-ceramic automotive clutch transmission disc, which belongs to automotive brake control technology. Compared with clutches made of other materials, ceramic clutches perform better in overload capacity. The main reasons are as follows: 1. Different material strengths : Ceramics are high-strength materials. When compared, asbestos has low strength and is easy to deform and break. 2. Different amounts of heat energy: The heat capacity of ceramics is much smaller than that of asbestos.

Product descriptionThe new ceramic formula uses a variety of lightweight porous fillers and does not contain any metal components (steel fiber foam, iron powder, heavy metals, etc.). Compared with semi-metallic formulas, ceramic brake pads have larger porosity and lower density. At the same time, compared with resin-based friction materials, the hardness of ceramic-based friction materials is also lower.

Product descriptionThe clutch plate is an important part of the clutch. It is a round steel plate. These are usually made of friction material that is attached to the engine's crankshaft. The purpose of the mounting plate is to transfer engine power to the gearbox. When releasing the clamp, the mounting plates stick together due to friction and rotate together. In this way, the power from the engine is transferred through the pressure plate to the transmission, propelling the vehicle forward.

Product DetailsThe clutch pressure plate is an important structure of the clutch. The function of the clutch plate plays an important role in the safe driving of the car. Engine power is transmitted or interrupted via a coupling mechanism. It depends on the driver's intentions. It also works with the clutch plate to ensure smooth starts. Shifts smoothly and prevents engine overload. The clutch pressure plate has a friction plate just like the brake pads on the wheels. Made of extremely durable asbestos and copper wire.

Product descriptionThe car's clutch driven plate is also a clutch component. It transfers engine torque to the transmission through friction conversion. Helps reduce vibration and shock in the driveline. And play a role in "disconnecting" and "connecting" the car clutch transmission plate is an important wear part of manual transmission vehicles. The clutch-driven hot press drives the plate leveling device to physically deform the material under constant temperature and pressure conditions.

Product descriptionThe main material of glass fiber clutch facing is a composite cloth made of ordinary medium-alkali (alkali-free) glass fiber yarn, blended fiber and one or two 0.17 copper wires. The materials are imported styrene-butadiene rubber 1502, high decomposition temperature phenolic resin and modified phenolic resin, friction performance improver. This range of products follows the traditional rubber impregnation technique.

Product descriptionClutch friction plates mainly use asbestos-based friction materials. As the requirements for environmental protection and safety become higher and higher, semi-metallic friction materials, composite fiber friction materials, and ceramic fiber friction materials gradually appear. Compared with clutches made of other materials, ceramic clutches perform better in terms of overload capacity. The main reasons are as follows: 1. Different material strengths: Ceramics are a high-strength material. In comparison, asbestos has low strength and is prone to deformation and breakage.