Clutch Face-manufacture,factory,supplier from China

Product DescriptionThe clutch driven plate requires a certain amount of friction to ensure sufficient power transfer. At the same time, certain wear resistance and high temperature resistance are also required to ensure long-term reliability.The design and performance of the clutch driven plate directly affects the operating effectiveness and lifespan of the clutch, so when using or maintaining the clutch, it is necessary to pay attention to the degree of wear and friction of the clutch plate.

Product descriptionClutch Structure: A clutch mainly consists of a control part, a transmission part, contacts, friction plates, etc. All of these work together to make the clutch work efficiently.Working principle: The clutch controls the movement through the controller and connects the transmission part with the contact point. Therefore, power from the engine is sent to the drive system.

Product descriptionA clutch is similar to a switch, engaging or disengaging power transmission. The active part and the driven part of the clutch mechanism can be temporarily separated, and can be gradually connected, and may also rotate relative to each other during the transmission process. There cannot be a rigid connection between the driving part and the driven part of the clutch.

Product descriptionThe clutch is located in the flywheel housing between the engine and transmission. Protects the transmission system from overload. When the car brakes suddenly, it will decelerate rapidly, because without the clutch the engine is tightly connected to the transmission. Therefore, all moving parts experience significant inertia. This can cause the load on the drivetrain to exceed its load capacity. This can damage mechanical parts, but clutches eliminate this danger by taking advantage of the relative motion that can occur between the actuating and driven parts of the clutch.

Product descriptionThe clutch is one of the important assemblies that make up the power train. The clutch driven plate is an important transmission component between the automobile engine and the gearbox. Its main function is to transmit the torque of the engine and cut off the power when starting and shifting gears. The clutch driven plate is another component of the clutch. It transmits the engine torque to the transmission through friction conversion, reduces the vibration and impact of the transmission system, and completes the "disengagement" and "engagement" tasks.

Product UsageThe clutch is mainly composed of four parts: the active part, the driven part, the pressing part and the operating mechanism. The clutch plate we usually call belongs to the driven part. Its working principle is also very simple, which relies on the principle of friction to transmit engine power.

Product descriptionThe clutch driven plate is an advanced mechanical device that can control and regulate engine power output. Widely used in automobiles, motorcycles, generator sets and other mechanical equipment. The clutch driven plate consists of a housing, bearings, friction surfaces, springs, fastening bolts, friction plates, etc.

Product descriptionThe car's clutch driven plate is also a clutch component. It transfers engine torque to the transmission through friction conversion. Helps reduce vibration and shock in the driveline. And play a role in "disconnecting" and "connecting" the car clutch transmission plate is an important wear part of manual transmission vehicles. The clutch-driven hot press drives the plate leveling device to physically deform the material under constant temperature and pressure conditions.

Product detailsThe clutch is an important component required in the vehicle transmission system, and the automobile clutch driven plate is an important wear component of manual transmission cars.

Product DescriptionThe clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed to the rear of the flywheel. The output shaft of the clutch is the input shaft of the gearbox.

Product descriptionThe clutch driven plate is a precision mechanical device that controls and regulates engine power. It is an integral part of the clutch. The clutch transmission plate is widely used in mechanical equipment such as automobiles and motorcycles.

Clutch driven plate structureA clutch driven plate consists of a housing, bearings, friction surfaces, springs, fastening bolts, friction plates, etc. The friction surface is mainly used to transmit the engine power to the shaft, the spring is used to push the friction plate to rotate, and the friction surface realizes the engine output.The clutch pressure plate is attached to the engine flywheel and rotates with the engine. The driven plate (friction plate) is splined to the transmission input shaft via a spline groove.

Product descriptionAutomobile clutch plates are an important part of the power system of engineering vehicles and play the role of disconnecting and connecting the power transmission from the engine to the drive shaft. Traditionally used semi-ceramic and organic clutch plates have a short lifespan and are easily affected by the external environment and driver's operating habits. As a component that transmits power, the clutch has three important functions: "transmitting power", "cutting off power" and "transmitting power". .

Clutch working principle:The clutch is installed between the engine and the transmission. It is an assembly in the automobile transmission system that is directly connected to the engine. Usually the clutch is installed together with the flywheel set of the engine crankshaft, and is the component that cuts off and transmits power between the engine and the vehicle's transmission system.

Clutch driven plate structureThe clutch drive plate consists of a housing, bearings, friction surface, spring, retaining bolts, friction plate, etc. The clutch drive plate is mounted on the engine flywheel and rotates with the engine. Driven plate The friction plate (friction plate) is connected to the gear input shaft through a groove.The function of the clutch drive plate1. Starting control: The clutch drive plate can control the engine starting. By converting engine power into vehicle movement. Thus making it possible to know how to start the engine.2.

Introduction to automobile clutchThe automobile clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed on the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the gearbox.

Product DescriptionThe clutch release bearing, also known as the release bearing, is an important part of the manual transmission system. Its main function is to engage and disengage the clutch by pressing the release finger on the clutch pressure plate.The clutch release bearing facilitates the engagement and separation of the clutch and plays an important role in the smooth operation of the clutch system. Regular inspection and maintenance of the release bearing will help prevent premature wear and ensure optimal performance of your manual transmission.  Product advantages1.

Product descriptionThe clutch drive plate is a precision mechanical device that controls and regulates engine power and is a component of the clutch Clutch transmission plates are widely used in mechanical equipment such as automobiles, motorcycles. generators, and are mainly used to control engine output. It transmits engine torque to the transmission through friction conversion. Helps reduce vibration and shock in the transmission system. Converts engine power into vehicle motion. Starts, stops, drives and accelerates the engine. and guarantee the safe operation of mechanical equipment.

Product descriptionThe automobile clutch driven plate is a key component in the clutch and is installed between the flywheel and the pressure plate.

Product descriptionComposite yarn clutch facings are clutch facings that are made of composite yarn materials. Composite yarn clutch facings are often considered more environmentally friendly compared to traditional asbestos-based clutch facings.

The clutch has three main functions: Ensure the car starts smoothly. This is the primary function of the clutch. Before the car starts, it is natural to start the engine. When the car starts, the car gradually accelerates from a completely stationary state. If the drive train (which connects the entire car) is rigidly connected to the engine, the car will suddenly rush forward as soon as the transmission is put into gear, but it will not start.Prevent the overload of the transmission system.

Product DescriptionThe clutch plate requires a certain amount of friction to transmit enough power. At the same time, it is also required to have certain wear resistance and high temperature resistance to ensure long-term reliability.The performance and overall performance of the clutch plate directly affect the operating effect and life of the clutch. Therefore, when using and maintaining the clutch, pay attention to the wear degree and condition of the clutch plate.

Product functionThe driven plate can also be called the rear pressure plate, which gives a force to the clutch friction plate from behind, causing the friction plate to move forward slightly and compress the driving plate (front pressure plate, flywheel) to transmit power.

Product descriptionThe clutch pressure plate is an important structure on the clutch, and its function plays an important role in the driving safety of the car. The clutch pressure plate is one of the most important components in the clutch assembly. It transmits and cuts off the engine's power transmission through the linkage mechanism according to the driver's wishes.