Clutch Friction Plate For Off-road-manufacture,factory,supplier from China

Product descriptionThe vehicle clutch plate is an important component of the engineering vehicle power system and is responsible for cutting off and connecting the power transmission from the engine to the drive shaft. Conventionally used traditional semi-ceramic and organic clutch plates have a short service life, and their quality is easily affected by factors such as the external environment and driver's operating habits.

The driven plate is a key component of the clutch hot-pressing leveling equipment designThe key components involved in hot press leveling equipment mainly include mechanical systems, molds and hydraulic systems.1. Mechanical system.According to the characteristics of hot-pressed leveling of the clutch driven plate, a transmission scheme combining hydraulic transmission and guide post guide mechanism is adopted.

Product descriptionThe clutch is an important component of the automobile's power system. It is responsible for cutting off and connecting the power to the engine. When driving on urban roads or complex road sections, the clutch has become one of our most frequently used components, and the quality of clutch use directly reflects the level of driving and also plays a role in protecting the vehicle. The automobile clutch driven plate is another component of the clutch.

Detailed introduction of clutch driven plate:1. Principle: The clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed on the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the gearbox. While the car is driving, the driver can depress or release the clutch pedal as needed to temporarily separate and gradually connect the engine and the transmission to cut off or transmit the power input from the engine to the transmission.2.

Product descriptionThe pressure plate is the active part of the clutch and always rotates with the flywheel. It can usually be driven by a boss, key or pin to rotate with the flywheel. At the same time, the pressure plate can move backward relative to the flywheel to disengage the clutch. The driven plate is mainly composed of the driven plate body, friction plate and driven plate hub. During the process of the clutch from disengagement to engagement, friction occurs between the friction plate, flywheel and pressure plate, generating a large amount of heat.

Product DescriptionThe clutch is located in the flywheel housing between the engine and the gearbox. The screws fix the clutch assembly on the rear plane of the flywheel. The output shaft of the clutch is the input shaft of the gearbox.

Product description The pressure plate of the clutch is attached to the engine flywheel and rotates with the engine. The driven plate (friction plate) is splined to the input shaft of the gearbox through a spline groove. When the friction plates rotate, the transmission input shaft also rotates. When the pressure plate pushes against the driven plate due to the action of the spring, power is transmitted, but when the pressure plate returns to the position where the clutch pedal is depressed, the driven plate becomes weakly separated.

Product descriptionThe clutch drive plate is a precision mechanical device that controls and regulates engine power and is a component of the clutch Clutch transmission plates are widely used in mechanical equipment such as automobiles, motorcycles. generators, and are mainly used to control engine output. It transmits engine torque to the transmission through friction conversion. Helps reduce vibration and shock in the transmission system. Converts engine power into vehicle motion. Starts, stops, drives and accelerates the engine. and guarantee the safe operation of mechanical equipment.

Product description    A car's clutch drive plate is an important wear and tear part of a manual transmission car. It transmits engine torque to the gearbox through friction conversion. Located between the engine flywheel and the gear input shaft. When you step on the pedal The steering wheel transfers the engine's rotational energy to the transmission. Properly adjust the tool for acceptable power transfer.  Packaging and shipping   Our ServiceQ 1.

Product descriptionThe pressure plate is a metal disc. In its normal state, it is tightly integrated with the clutch plate and becomes a whole. It rotates with the engine and transmits power to the gearbox. When the clutch pedal is depressed, the pressure plate separates from the clutch plate, cutting off the engine's power output, and you can shift gears. Lift the clutch pedal, and the pressure plate is combined with the clutch plate again to transmit power.  clutch pressure disc brakeWhat is widely used is a friction clutch pressed by a spring (friction clutch for short).

Product DescriptionThe clutch drive plate is an advanced mechanical device that can control and control the engine's power output. Widely used in cars motorcycle generator set and other mechanical equipment The clutch drive plate is mainly used to control the output of engine power, can convert engine power into vehicle movement, start, stop, run and change engine speed, thus ensuring the safe operation of mechanical equipment. The clutch drive plate consists of a housing, bearing, friction surface, spring, retaining bolt, friction plate, etc.

The driven plate assembly is mainly composed of friction plate, driven plate, shock absorber and spline hub. The driven plate has a great influence on the working performance of the clutch and should meet the following design requirements:1. The moment of inertia should be as small as possible to reduce the impact between gear teeth when the transmission is shifting.2. It should have axial elasticity to make the clutch engagement smooth and easy to start, and to make the pressure on the friction surface uniform and reduce wear.3.

Product description The seize disc is an necessary section of the clutch. It is a round steel disc, normally made of friction material, installed on the crankshaft of the engine. The function of the seize plate is to transmit engine strength to the transmission.When the grasp pedal is released, the friction between the seize plate and the grab power plate will purpose them to come into shut contact and rotate together.

Product descriptionAs a component that transmits power, the clutch has three important functions: "transmitting power", "cutting off power" and "preventing overloading". The driven plate, also called the rear pressure plate, exerts force on the clutch friction plate from the rear, making the friction plate slightly Move forward and compress the driving plate (front pressure plate, flywheel) to transmit power.The driven disc is necessary for thermal pressure equalization of the clutch.

How the clutch worksDuring separation, step on the pedal, and the separation fork pushes the separation bearing, driving the inner end of the separation lever to move left, and the outer end of the separation lever to move right.

Product descriptionThe clutch drive plate is an advanced mechanical device that can control and adjust the engine output power. It is widely used in mechanical equipment such as automobiles,motorcycle and generator set The clutch drive plate is mainly used to control engine power.Can convert engine power into vehicle movement, start, stop, run, and change engine speed. Thus ensuring the safe operation of mechanical equipment. The clutch drive plate consists of a housing, bearings, friction surface, spring, tightening bolts, friction plate, etc.

Product descriptionThe clutch is one of the important assemblies that make up the power train. The clutch driven plate is an important transmission component between the automobile engine and the gearbox. Its main function is to transmit the torque of the engine and cut off the power when starting and shifting gears. The clutch driven plate is another component of the clutch. It transmits the engine torque to the transmission through friction conversion, reduces the vibration and impact of the transmission system, and completes the "disengagement" and "engagement" tasks.

Product descriptionCeramic brake pads have greater braking capacity than traditional brake pads and are also very lightweight. Of course, its biggest feature is high temperature resistance and wear resistance, and ceramic brake pads improve braking performance. Ceramic brake pads can be used at temperatures up to 1000°C for a long time and can meet the high performance requirements of various high-performance braking materials. For example, in F1 racing cars, the brake pads are all brake pads with ceramic components.

Product DescriptionThe driven plate assembly is mainly composed of friction plate, driven plate, shock absorber, spline hub, etc. The driven disc has a significant impact on the operating performance of the clutch and must meet the following design requirements:1. The moment of inertia should be as small as possible to reduce the impact between gear teeth when the transmission shifts gears.2. The clutch requires axial elasticity to ensure smooth engagement and startability, as well as equalize the pressure on the friction surface and reduce wear.3.

Here are some of their key features:1. Efficient strength transmission: Clutch discs efficaciously transmit strength from the engine to the transmission, permitting easy engagement and disengagement of the engine energy as required. This allows the car to trade gears, switch power, and gain optimum performance.2. Smooth engagement: A well-designed grasp disc offers a clean and gradual engagement of the engine with the transmission, permitting for smoother transferring and decreased put on on the transmission components.

Product detailsThe clutch is installed between the engine and the transmission. It is a component in the transmission system that is directly connected to the engine. It is responsible for engaging and cutting off the power transmission between the engine and the transmission. The basic requirements for the clutch are: the active part and the driven part can be temporarily separated, and can be gradually connected, and relative slip may occur during the transmission process. Its specific functions are as follows.1. Ensure the car starts smoothly.

Product descriptionThe automobile driven clutch plate is another part of the clutch. It transmits the engine torque to the transmission through friction conversion, reduces the vibration and impact of the transmission system, and plays the role of "disconnection" and "grafting". The automobile clutch plate is an essential wearing part for manual transmission cars.

Product descriptionAutomobile clutch plates are an important part of the power system of engineering vehicles and play the role of disconnecting and connecting the power transmission from the engine to the drive shaft. Traditionally used semi-ceramic and organic clutch plates have a short lifespan and are easily affected by the external environment and driver's operating habits. As a component that transmits power, the clutch has three important functions: "transmitting power", "cutting off power" and "transmitting power". .

Product descriptionThe clutch is installed on the engine and transmission, and is an assembly in the automobile transmission system that is directly connected to the engine. The clutch is needed throughout the entire process from starting to normal driving. Its function is to gradually connect the engine and transmission to cut off or transmit the power output from the engine to the transmission system. A clutch is similar to a switch, and has the function of engaging or disengaging power transmission.