Clutch Friction Plate For XKT136 XCMG-manufacture,factory,supplier from China

Detailed introduction of clutch driven plate:1. Principle: The clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed on the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the gearbox. While the car is driving, the driver can depress or release the clutch pedal as needed to temporarily separate and gradually connect the engine and the transmission to cut off or transmit the power input from the engine to the transmission.2.

The driven plate assembly is mainly composed of friction plate, driven plate, shock absorber and spline hub. The driven plate has a great influence on the working performance of the clutch and should meet the following design requirements:1. The moment of inertia should be as small as possible to reduce the impact between gear teeth when the transmission is shifting.2. It should have axial elasticity to make the clutch engagement smooth and easy to start, and to make the pressure on the friction surface uniform and reduce wear.3.

Product descriptionThe clutch plate is an important part of the clutch. It is a round steel plate. These are usually made of friction material that is attached to the engine's crankshaft. The purpose of the mounting plate is to transfer engine power to the gearbox. When releasing the clamp, the mounting plates stick together due to friction and rotate together. In this way, the power from the engine is transferred through the pressure plate to the transmission, propelling the vehicle forward.

Product descriptionThe clutch drive plate is a precision mechanical device that controls and regulates engine power and is a component of the clutch Clutch transmission plates are widely used in mechanical equipment such as automobiles, motorcycles. generators, and are mainly used to control engine output. It transmits engine torque to the transmission through friction conversion. Helps reduce vibration and shock in the transmission system. Converts engine power into vehicle motion. Starts, stops, drives and accelerates the engine. and guarantee the safe operation of mechanical equipment.

Product descriptionThe automobile clutch driven plate is an indispensable wearing part for manual transmission cars. It transmits the engine torque to the transmission through friction conversion, reduces the vibration and impact of the transmission system, and completes the "disengagement" and "engagement" tasks. The clutch driven plate is mainly composed of driven plate, driven plate hub, friction plate and other parts. They work together to provide smooth and stable performance and make the clutch work efficiently.1.

Product descriptionThe pressure plate is the active part of the clutch and always rotates with the flywheel. It can usually be driven by a boss, key or pin to rotate with the flywheel. At the same time, the pressure plate can move backward relative to the flywheel to disengage the clutch. The driven plate is mainly composed of the driven plate body, friction plate and driven plate hub. During the process of the clutch from disengagement to engagement, friction occurs between the friction plate, flywheel and pressure plate, generating a large amount of heat.

Product description    A car's clutch drive plate is an important wear and tear part of a manual transmission car. It transmits engine torque to the gearbox through friction conversion. Located between the engine flywheel and the gear input shaft. When you step on the pedal The steering wheel transfers the engine's rotational energy to the transmission. Properly adjust the tool for acceptable power transfer.  Packaging and shipping   Our ServiceQ 1.

Product description The seize disc is an necessary section of the clutch. It is a round steel disc, normally made of friction material, installed on the crankshaft of the engine. The function of the seize plate is to transmit engine strength to the transmission.When the grasp pedal is released, the friction between the seize plate and the grab power plate will purpose them to come into shut contact and rotate together.

How the clutch worksDuring separation, step on the pedal, and the separation fork pushes the separation bearing, driving the inner end of the separation lever to move left, and the outer end of the separation lever to move right.

Features of Clutch Disk For XCMG XKT136There are 6 corrugated spring steel plates around the driven plate steel plate, and 6 window holes are evenly arranged on the corrugated spring steel plate. The driven plate steel plate communicates with the first friction lining and the second friction lining respectively through the window holes.

Product detailsThe clutch is an important component required in the vehicle transmission system, and the automobile clutch driven plate is an important wear component of manual transmission cars.

Product descriptionA clutch is similar to a switch, engaging or disengaging power transmission. The active part and the driven part of the clutch mechanism can be temporarily separated, and can be gradually connected, and may also rotate relative to each other during the transmission process. There cannot be a rigid connection between the driving part and the driven part of the clutch.

Product description The pressure plate of the clutch is attached to the engine flywheel and rotates with the engine. The driven plate (friction plate) is splined to the input shaft of the gearbox through a spline groove. When the friction plates rotate, the transmission input shaft also rotates. When the pressure plate pushes against the driven plate due to the action of the spring, power is transmitted, but when the pressure plate returns to the position where the clutch pedal is depressed, the driven plate becomes weakly separated.

Product descriptionCeramic brake pads use high-tech materials such as large-grain graphite/brass/high-grade ceramics (non-asbestos) and semi-metals, which have the advantages of high temperature resistance, wear resistance, stable braking, repair of brake discs, environmental protection, no noise and long service life. Excellent material properties, overcoming the material and process defects of traditional brake pads, it is the most cutting-edge advanced ceramic brake pad in the world.

The driven plate is a key component of the clutch hot-pressing leveling equipment designThe key components involved in hot press leveling equipment mainly include mechanical systems, molds and hydraulic systems.1. Mechanical system.According to the characteristics of hot-pressed leveling of the clutch driven plate, a transmission scheme combining hydraulic transmission and guide post guide mechanism is adopted.

Product DescriptionThe clutch is located in the flywheel housing between the engine and the gearbox. The screws fix the clutch assembly on the rear plane of the flywheel. The output shaft of the clutch is the input shaft of the gearbox.

Product description Withstand Pressure: The clutch pressure plate takes the strain from the seize strain plate spring and transmits it between the grab disc and flywheel to make sure the applicable operation of the clutch.Metal Material: Clutch stress plate is normally made of excessive electricity steel material, such as metal or aluminum alloy, to make sure adequate energy and durability.Friction surface: The grasp stress plate commonly has a friction floor that serves to make contact with the grasp disc to furnish friction so that the snatch disc can desirable contact and disengage from the

Product DescriptionThe clutch drive plate is an advanced mechanical device that can control and control the engine's power output. Widely used in cars motorcycle generator set and other mechanical equipment The clutch drive plate is mainly used to control the output of engine power, can convert engine power into vehicle movement, start, stop, run and change engine speed, thus ensuring the safe operation of mechanical equipment. The clutch drive plate consists of a housing, bearing, friction surface, spring, retaining bolt, friction plate, etc.

Clutch working principle:The clutch is located in the flywheel housing between the engine and transmission. It consists of friction plates, spring plates, pressure plates, and power output shafts. It is located between the engine and the gearbox. The engine oil is stored in the flywheel of the engine. When the driver depresses the clutch, the clutch will actually loosen. This will temporarily disconnect the engine and transmission. The clutch will actually start to move when the driver releases the clutch pedal. In this way, the engine's power is transferred to the transmission system.

Product descriptionThe clutch drive plate is an advanced mechanical device that can control and adjust the engine output power. It is widely used in mechanical equipment such as automobiles,motorcycle and generator set The clutch drive plate is mainly used to control engine power.Can convert engine power into vehicle movement, start, stop, run, and change engine speed. Thus ensuring the safe operation of mechanical equipment. The clutch drive plate consists of a housing, bearings, friction surface, spring, tightening bolts, friction plate, etc.

Here are some of their key features:1. Efficient strength transmission: Clutch discs efficaciously transmit strength from the engine to the transmission, permitting easy engagement and disengagement of the engine energy as required. This allows the car to trade gears, switch power, and gain optimum performance.2. Smooth engagement: A well-designed grasp disc offers a clean and gradual engagement of the engine with the transmission, permitting for smoother transferring and decreased put on on the transmission components.

Product DescriptionThe driven plate assembly is mainly composed of friction plate, driven plate, shock absorber, spline hub, etc. The driven disc has a significant impact on the operating performance of the clutch and must meet the following design requirements:1. The moment of inertia should be as small as possible to reduce the impact between gear teeth when the transmission shifts gears.2. The clutch requires axial elasticity to ensure smooth engagement and startability, as well as equalize the pressure on the friction surface and reduce wear.3.

Product descriptionCeramic brake pads have greater braking capacity than traditional brake pads and are also very lightweight. Of course, its biggest feature is high temperature resistance and wear resistance, and ceramic brake pads improve braking performance. Ceramic brake pads can be used at temperatures up to 1000°C for a long time and can meet the high performance requirements of various high-performance braking materials. For example, in F1 racing cars, the brake pads are all brake pads with ceramic components.

Product Display   SpecificationTypeClutch DiscCertificateIATF16949:2016Place of OriginShandong,ChinaWarranty12 MONTHSLogistics port Shanghai/Ningbo/QingdaoTruck Model XCMG,LCMG,SDLG,SANY,LiuGong,TONLY,CNHTCSupply Ability120000 Sets/MonthOEMOEM Standard SizeQuality100% Professional TestSize430mmBrand NameLHweight15 kgPackageStandrad PackageConditionNewPacking & DeliveryWe have cooperated with experienced shipping forwarders for many years, they arrange the shipment.