Compressor Oil-manufacture,factory,supplier from China

Product UsageLubricating oil is a liquid or semi-solid lubricant used in various types of automobiles and mechanical equipment to reduce friction and protect machinery and workpieces. It mainly plays the functions of lubrication, auxiliary cooling, rust prevention, cleaning, sealing and buffering.Viscosity reflects the internal friction of the oil and is an indicator of the oil's oiliness and fluidity. Without adding any functional additives, the greater the viscosity, the higher the oil film strength and the worse the fluidity.

Product UsageEngine oil refers to lubricating oil specifically used in internal combustion engines. It consists of 67% to 90% of base oil and 10% to 33% of additives. In addition to lubrication, it also has functions such as cleaning, rust prevention, cooling, and air sealing.

Product UsageLubricating oil is a liquid or semi-solid lubricant used in various types of automobiles and mechanical equipment to reduce friction and protect machinery and workpieces. It mainly plays the functions of lubrication, auxiliary cooling, rust prevention, cleaning, sealing and buffering.Viscosity reflects the internal friction of the oil and is an indicator of the oil's oiliness and fluidity. Without adding any functional additives, the greater the viscosity, the higher the oil film strength and the worse the fluidity.

CK-4 Product advantages The 100,000-kilometer ultra-long-mileage lubricant has passed APICK-4 and ACEAE9 certificationIt is prepared from hydrogenated base oil, imported high-efficiency additives and special friction modifiersUse special friction modifier to effectively save fuel consumption, which can save you more than 0.5% of fuelExcellent oxidation stability, effectively extending the oil change intervalExcellent anti-wear performance, providing strong anti-wear protection even under harsh conditionsSpecificationTypeEngine OilPlace of OriginShaanxi,ChinaBrand NameShaanxi Automobile

Clutch working principle:The clutch is located in the flywheel housing between the engine and transmission. It consists of friction plates, spring plates, pressure plates, and power output shafts. It is located between the engine and the gearbox. The engine oil is stored in the flywheel of the engine. When the driver depresses the clutch, the clutch will actually loosen. This will temporarily disconnect the engine and transmission. The clutch will actually start to move when the driver releases the clutch pedal. In this way, the engine's power is transferred to the transmission system.

The automobile clutch driven plate is an indispensable and consumable part of a manual transmission automobile.1. The appearance and geometric dimensions of this product are the same as the original ordinary driven disk, and the installation method is simple.2. The gear shifting operation is simple and smooth during normal driving. There is no need to press the clutch pedal, and you can shift gears as needed by retracting the oil. (The clutch pedal still needs to be depressed when the car starts and enters first gear and reverses).3. Extend the service life of vehicle-related parts.

The automobile clutch driven plate is an important wearing part of manual transmission cars.1. The appearance and geometric dimensions of this product are the same as those of ordinary driven plates. And the installation method is very simple.2. Shifting gears is easy and smooth during normal driving. No need to press the clutch pedal. And you can change gears at will by sucking oil. (The clutch pedal must be depressed and placed in 1st and reverse when starting the car.)3. Extend the service life of vehicle-related components.

Product descriptionThe automobile clutch driven plate is an important wearing part of manual transmission cars.1. The appearance and geometric dimensions of this product are the same as the original traditional drive disk. And the installation method is very simple.2. Shifting gears is easy and smooth during normal driving. No need to press the clutch pedal. And by sucking in the oil you can change the gears as often as you want. (The clutch must be depressed when starting, shifting to first gear, and reversing.)3. Extend the life of vehicle-related components.

Product descriptionThis enables the engine and transmission to gradually engage, thereby ensuring a smooth start of the car. Temporarily disconnects the engine from the transmission to facilitate shifting and reduce shift shock.

Product descriptionThe dump truck ceramic clutch is a new type of metal-ceramic automobile clutch driven disc, which belongs to the field of automobile brake control technology. The driven plate includes cermet friction plate, driven plate, shock absorber spring, damping plate, driven plate hub and rod compression spring. Ceramic clutches perform better in terms of overload capacity compared to clutches made of other materials. The main reasons are as follows: 1. Different material strengths: Ceramics is a high-strength material.

Product descriptionComposite yarn clutch facings are clutch facings that are made of composite yarn materials. Composite yarn clutch facings are often considered more environmentally friendly compared to traditional asbestos-based clutch facings.

Product descriptionThe new ceramic formula uses a variety of lightweight porous fillers and does not contain any metal components (steel fiber foam, iron powder, heavy metals, etc.). Compared with semi-metallic formulas, ceramic brake pads have larger porosity and lower density. At the same time, compared with resin-based friction materials, the hardness of ceramic-based friction materials is also lower.

Product descriptionThe main material of glass fiber clutch facing is a composite cloth made of ordinary medium-alkali (alkali-free) glass fiber yarn, blended fiber and one or two 0.17 copper wires. The materials are imported styrene-butadiene rubber 1502, high decomposition temperature phenolic resin and modified phenolic resin, friction performance improver. This range of products follows the traditional rubber impregnation technique.

Product descriptionThe main material of High Copper Clutch Facing LH8106 is composite cloth made of ordinary medium alkali (non-alkali) glass fiber mixed fiber and 4-7 0.19 copper wire, imported styrene butadiene rubber 1502, high decomposition temperature phenolic resin, friction performance regulator, etc.

Product descriptionClutch friction plates mainly use asbestos-based friction materials. As the requirements for environmental protection and safety become higher and higher, semi-metallic friction materials, composite fiber friction materials, and ceramic fiber friction materials gradually appear. Compared with clutches made of other materials, ceramic clutches perform better in terms of overload capacity. The main reasons are as follows: 1. Different material strengths: Ceramics are a high-strength material. In comparison, asbestos has low strength and is prone to deformation and breakage.

Product descriptionDepending on the application, clutch facings can be made from a variety of materials, but some of the most common include asbestos, textile fabrics such as Kevlar and Kevlar, and ceramic materials. Like disc brake pads and other clutch materials, the materials used for clutch facings need to be durable. Because the process of driveshaft engagement and disengagement involves the conversion of kinetic energy to thermal energy, the clutch facings must be able to withstand the tension and high temperatures reached during this process.

Product descriptionThe car's clutch driven plate is also a clutch component. It transfers engine torque to the transmission through friction conversion. Helps reduce vibration and shock in the driveline. And play a role in "disconnecting" and "connecting" the car clutch transmission plate is an important wear part of manual transmission vehicles. The clutch-driven hot press drives the plate leveling device to physically deform the material under constant temperature and pressure conditions.

PRODUCT PROCESSSAFETY IS WITH YOUEnsuring your safety even at high-speed or emergency braking.Withthousands of hours dynotestingsimulate differenttemperatures,weather androad conditions.DRILLED AND SLOTTEIThe construction of a brand-newproduction line to producetheir high performance.ALLOY DISCThese two-piece rotors replacethestock one-piece discs of your carwith absolutely nomodifications required.  Product parametersOE NO.1601210-76A, 1601210-76BProduct NameClutch DiscWarranty12 MONTHSQualityHigh-Quality/100% Brand new and High qualityPlace of OriginShandong,CHINAPac

The driven plate is a clutch hot press leveling deviceHot pressure leveling equipment is mainly composed of mechanical system, hydraulic system, heating device and electrical system. The mechanical system is the main body of the hot press leveling equipment. The hydraulic system is an actuator that enables precise control of pressure. The heating device consists of a resistance wire and an optocoupler sensor to control the temperature change of the driven disk.

Product DetailsThe driven plate assembly is composed of friction plates, driven plate hubs and other parts, and is used to transmit engine power to the driven parts of the transmission. The car clutch driven plate is another component of the clutch. Clutch driven discs can be widely used in automobiles. Mechanical equipment such as motorcycles and generator sets can control the start, stop, operation, gear shifting, etc. of the engine to ensure the safe operation of the mechanical equipment.Advantages of disc clutch1.

Clutch working principle:The clutch is installed between the engine and the transmission. It is an assembly in the automobile transmission system that is directly connected to the engine. Usually the clutch is installed together with the flywheel set of the engine crankshaft, and is the component that cuts off and transmits power between the engine and the vehicle's transmission system.

Product UsageClutch Kit for Tipper truck is an important structure of the clutch, which plays an important role in driving safety. The clutch pressure plate is one of the most important components of the clutch assembly, which transmits and interrupts the engine's power transmission through the linkage mechanism according to the driver's wishes.

Product descriptionThe automobile clutch driven plate is a key component in the clutch and is installed between the flywheel and the pressure plate. During operation, the pressure plate is tightly pressed against the surface of the flywheel, and the engine power can be transmitted by relying on the friction between the friction lining on the driven plate and the surfaces of the flywheel and pressure plate. Ceramic Clutch for Tipper Truck is a new structure of metal-ceramic automobile clutch driven disc, which belongs to the field of vehicle braking control technology.

Product description1. Clutch structure: The clutch is mainly composed of a regulator, a power transmission part, a contact and a friction plate. They cooperate with each other to make the clutch operate effectively.2. Working principle: The clutch is controlled by the displacement of the regulator to connect the power transmission part with the contact point, thereby transmitting the engine power to the transmission. When the engine reaches the position set by the regulator, the clutch can be closed and the transmission system can be shifted.3.