Gas Oil-manufacture,factory,supplier from China

Product UsageLubricating oil is a liquid or semi-solid lubricant used in various types of automobiles and mechanical equipment to reduce friction and protect machinery and workpieces. It mainly plays the functions of lubrication, auxiliary cooling, rust prevention, cleaning, sealing and buffering.Viscosity reflects the internal friction of the oil and is an indicator of the oil's oiliness and fluidity. Without adding any functional additives, the greater the viscosity, the higher the oil film strength and the worse the fluidity.

Product UsageEngine oil refers to lubricating oil specifically used in internal combustion engines. It consists of 67% to 90% of base oil and 10% to 33% of additives. In addition to lubrication, it also has functions such as cleaning, rust prevention, cooling, and air sealing.

Product UsageLubricating oil is a liquid or semi-solid lubricant used in various types of automobiles and mechanical equipment to reduce friction and protect machinery and workpieces. It mainly plays the functions of lubrication, auxiliary cooling, rust prevention, cleaning, sealing and buffering.Viscosity reflects the internal friction of the oil and is an indicator of the oil's oiliness and fluidity. Without adding any functional additives, the greater the viscosity, the higher the oil film strength and the worse the fluidity.

CK-4 Product advantages The 100,000-kilometer ultra-long-mileage lubricant has passed APICK-4 and ACEAE9 certificationIt is prepared from hydrogenated base oil, imported high-efficiency additives and special friction modifiersUse special friction modifier to effectively save fuel consumption, which can save you more than 0.5% of fuelExcellent oxidation stability, effectively extending the oil change intervalExcellent anti-wear performance, providing strong anti-wear protection even under harsh conditionsSpecificationTypeEngine OilPlace of OriginShaanxi,ChinaBrand NameShaanxi Automobile

Clutch working principle:The clutch is located in the flywheel housing between the engine and transmission. It consists of friction plates, spring plates, pressure plates, and power output shafts. It is located between the engine and the gearbox. The engine oil is stored in the flywheel of the engine. When the driver depresses the clutch, the clutch will actually loosen. This will temporarily disconnect the engine and transmission. The clutch will actually start to move when the driver releases the clutch pedal. In this way, the engine's power is transferred to the transmission system.

The automobile clutch driven plate is an indispensable and consumable part of a manual transmission automobile.1. The appearance and geometric dimensions of this product are the same as the original ordinary driven disk, and the installation method is simple.2. The gear shifting operation is simple and smooth during normal driving. There is no need to press the clutch pedal, and you can shift gears as needed by retracting the oil. (The clutch pedal still needs to be depressed when the car starts and enters first gear and reverses).3. Extend the service life of vehicle-related parts.

The automobile clutch driven plate is an important wearing part of manual transmission cars.1. The appearance and geometric dimensions of this product are the same as those of ordinary driven plates. And the installation method is very simple.2. Shifting gears is easy and smooth during normal driving. No need to press the clutch pedal. And you can change gears at will by sucking oil. (The clutch pedal must be depressed and placed in 1st and reverse when starting the car.)3. Extend the service life of vehicle-related components.

Product descriptionThe automobile clutch driven plate is an important wearing part of manual transmission cars.1. The appearance and geometric dimensions of this product are the same as the original traditional drive disk. And the installation method is very simple.2. Shifting gears is easy and smooth during normal driving. No need to press the clutch pedal. And by sucking in the oil you can change the gears as often as you want. (The clutch must be depressed when starting, shifting to first gear, and reversing.)3. Extend the life of vehicle-related components.

满足认证：产品性能满足:康明斯CES 20078,沃尔沃 VDS-3。质量等级：APICI-4 ACEA E7    粘度级别：10W-30   15W-40  20W-50   执行标准：GB  11122-2006   包装形式：4L  18L

·本品是一款由合成基础油复配经验证的高品质进口复合添加剂精心调制而成的商用车重载变速箱油，可同时满足 MT 和AMT的润滑要求。

应用推荐：.适用于在高速冲击负荷，高速低扭矩工况下使用的各种进口、国产高级工程车辆和其他车辆的准双曲面齿轮驱动桥、驱动轴的润滑。.推荐用于陕汽、一汽、重汽、东风等商用车型。产品规格：4L   18L 粘度：80W-90  85W-90   85W-140执行标准：GB13895-2018

The clutch is installed between the engine and the transmission. It is an assembly in the automobile transmission system that is directly connected to the engine. Usually the clutch is installed together with the flywheel set of the engine crankshaft, and is the component that cuts off and transmits power between the engine and the vehicle's transmission system.

Product description The driven plate assembly is composed of friction plates, driven plate hubs and other parts and is used to transmit engine power to the driven parts of the transmission. The automobile clutch driven plate is another component of the clutch. It transmits the engine torque to the transmission through friction conversion, reduces the vibration and impact of the transmission system, and completes the "disengagement" and "engagement" tasks.

Product description1. Starting control: The clutch driven plate can control the starting of the engine, converting the power of the engine into the movement of the car, thereby realizing the starting of the engine.2. Speed change control: The clutch driven plate can control the engine speed change. It can change the engine speed by changing the friction of the friction plate, thereby achieving engine speed change.3. Stop control: The clutch driven plate can control the stop of the engine.

Product description    A car's clutch drive plate is an important wear and tear part of a manual transmission car. It transmits engine torque to the gearbox through friction conversion. Located between the engine flywheel and the gear input shaft. When you step on the pedal The steering wheel transfers the engine's rotational energy to the transmission. Properly adjust the tool for acceptable power transfer.  Packaging and shipping   Our ServiceQ 1.

Product DescriptionThe driven plate assembly is mainly composed of friction plate, driven plate, shock absorber, spline hub, etc. The driven disc has a significant impact on the operating performance of the clutch and must meet the following design requirements:1. The moment of inertia should be as small as possible to reduce the impact between gear teeth when the transmission shifts gears.2. The clutch requires axial elasticity to ensure smooth engagement and startability, as well as equalize the pressure on the friction surface and reduce wear.3.

Product descriptionThe clutch is installed between the engine and transmission. It is an assembly in the vehicle's transmission system that is directly connected to the engine. Clutch driven plate structure: The clutch driven plate consists of a housing, bearings, friction surfaces, springs, fastening bolts, friction plates, etc. The friction surface is mainly used to transmit engine power to the shaft, the spring is used to push the friction plate to rotate, and the friction surface realizes the output of the engine.

Product descriptionThe clutch drive plate is an advanced mechanical device that can control and adjust the engine output power. It is widely used in mechanical equipment such as automobiles,motorcycle and generator set The clutch drive plate is mainly used to control engine power.Can convert engine power into vehicle movement, start, stop, run, and change engine speed. Thus ensuring the safe operation of mechanical equipment. The clutch drive plate consists of a housing, bearings, friction surface, spring, tightening bolts, friction plate, etc.

Here are some of their key features:1. Efficient strength transmission: Clutch discs efficaciously transmit strength from the engine to the transmission, permitting easy engagement and disengagement of the engine energy as required. This allows the car to trade gears, switch power, and gain optimum performance.2. Smooth engagement: A well-designed grasp disc offers a clean and gradual engagement of the engine with the transmission, permitting for smoother transferring and decreased put on on the transmission components.

Product UsageA clutch mainly consists of a clutch flywheel and a pressure plate. A flywheel is a metal disk that is directly connected to the crankshaft in an engine. The engine crankshaft rotates many times and the flywheel also rotates many times. The clutch pressure plate is connected to the transmission. The clutch pressure plate is driven by a hydraulic transmission or a mechanical transmission, that is, the clutch pedal in the cab operates through a hydraulic transmission and a mechanical transmission. To check whether the clutch pressure plate is integrated with the flywheel or not.

Product descriptionThe clutch driven plate is a precision mechanical device that controls and regulates engine output. Widely used in automobiles, motorcycles, generators and other mechanical equipment, the clutch plate is mainly used to control the power of the engine. It converts engine power into vehicle motion and starts, stops, turns and accelerates the engine to ensure the safe operation of mechanical equipment. The clutch guide is another part of the clutch. It transfers engine torque to the transmission through friction conversion. Reduce vibration and gear shock.

Product descriptionThe automobile clutch driven plate is another component of the clutch. It transmits the engine torque to the transmission through friction conversion, reduces the vibration and impact of the transmission system, and plays the role of "separation" and "engagement". The automobile clutch driven plate is an essential wearing part for manual transmission vehicles.

Product descriptionThe clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed on the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the gearbox.

The driven plate assembly is mainly composed of friction plate, driven plate, shock absorber and spline hub. The driven plate has a great influence on the working performance of the clutch and should meet the following design requirements:1. The moment of inertia should be as small as possible to reduce the impact between gear teeth when the transmission is shifting.2. It should have axial elasticity to make the clutch engagement smooth and easy to start, and to make the pressure on the friction surface uniform and reduce wear.3.