Oil Change-manufacture,factory,supplier from China

Product UsageLubricating oil is a liquid or semi-solid lubricant used in various types of automobiles and mechanical equipment to reduce friction and protect machinery and workpieces. It mainly plays the functions of lubrication, auxiliary cooling, rust prevention, cleaning, sealing and buffering.Viscosity reflects the internal friction of the oil and is an indicator of the oil's oiliness and fluidity. Without adding any functional additives, the greater the viscosity, the higher the oil film strength and the worse the fluidity.

CK-4 Product advantages The 100,000-kilometer ultra-long-mileage lubricant has passed APICK-4 and ACEAE9 certificationIt is prepared from hydrogenated base oil, imported high-efficiency additives and special friction modifiersUse special friction modifier to effectively save fuel consumption, which can save you more than 0.5% of fuelExcellent oxidation stability, effectively extending the oil change intervalExcellent anti-wear performance, providing strong anti-wear protection even under harsh conditionsSpecificationTypeEngine OilPlace of OriginShaanxi,ChinaBrand NameShaanxi Automobile

Product UsageEngine oil refers to lubricating oil specifically used in internal combustion engines. It consists of 67% to 90% of base oil and 10% to 33% of additives. In addition to lubrication, it also has functions such as cleaning, rust prevention, cooling, and air sealing.

Product UsageLubricating oil is a liquid or semi-solid lubricant used in various types of automobiles and mechanical equipment to reduce friction and protect machinery and workpieces. It mainly plays the functions of lubrication, auxiliary cooling, rust prevention, cleaning, sealing and buffering.Viscosity reflects the internal friction of the oil and is an indicator of the oil's oiliness and fluidity. Without adding any functional additives, the greater the viscosity, the higher the oil film strength and the worse the fluidity.

The automobile clutch driven plate is an important wearing part of manual transmission cars.1. The appearance and geometric dimensions of this product are the same as those of ordinary driven plates. And the installation method is very simple.2. Shifting gears is easy and smooth during normal driving. No need to press the clutch pedal. And you can change gears at will by sucking oil. (The clutch pedal must be depressed and placed in 1st and reverse when starting the car.)3. Extend the service life of vehicle-related components.

Product description1. Starting control: The clutch driven plate can control the starting of the engine, converting the power of the engine into the movement of the car, thereby realizing the starting of the engine.2. Speed change control: The clutch driven plate can control the engine speed change. It can change the engine speed by changing the friction of the friction plate, thereby achieving engine speed change.3. Stop control: The clutch driven plate can control the stop of the engine.

Product descriptionThe automobile clutch driven plate is an important wearing part of manual transmission cars.1. The appearance and geometric dimensions of this product are the same as the original traditional drive disk. And the installation method is very simple.2. Shifting gears is easy and smooth during normal driving. No need to press the clutch pedal. And by sucking in the oil you can change the gears as often as you want. (The clutch must be depressed when starting, shifting to first gear, and reversing.)3. Extend the life of vehicle-related components.

Product DescriptionThe clutch driven plate is a very advanced mechanical device that can control and adjust the power output of the engine. It is widely used in mechanical equipment such as automobiles, motorcycles, and generator sets. The clutch driven plate is mainly used to control the output of engine power. It can convert the power of the engine into the movement of the car, start, stop, run and change the speed of the engine, thereby ensuring the safe operation of mechanical equipment.

Clutch working principle:The clutch is located in the flywheel housing between the engine and transmission. It consists of friction plates, spring plates, pressure plates, and power output shafts. It is located between the engine and the gearbox. The engine oil is stored in the flywheel of the engine. When the driver depresses the clutch, the clutch will actually loosen. This will temporarily disconnect the engine and transmission. The clutch will actually start to move when the driver releases the clutch pedal. In this way, the engine's power is transferred to the transmission system.

The automobile clutch driven plate is an indispensable and consumable part of a manual transmission automobile.1. The appearance and geometric dimensions of this product are the same as the original ordinary driven disk, and the installation method is simple.2. The gear shifting operation is simple and smooth during normal driving. There is no need to press the clutch pedal, and you can shift gears as needed by retracting the oil. (The clutch pedal still needs to be depressed when the car starts and enters first gear and reverses).3. Extend the service life of vehicle-related parts.

Product DescriptionThe clutch driven plate is a very advanced mechanical device that can control and adjust the power output of the engine. It is widely used in mechanical equipment such as automobiles, motorcycles, and generator sets. The clutch driven plate is mainly used to control the output of engine power. It can convert the power of the engine into the movement of the car, and start, stop, run and change the speed of the engine. The engine flywheel is the driving part of the clutch.

The driven plate is a clutch hot press leveling deviceHot pressure leveling equipment is mainly composed of mechanical system, hydraulic system, heating device and electrical system. The mechanical system is the main body of the hot press leveling equipment. The hydraulic system is an actuator that enables precise control of pressure. The heating device consists of a resistance wire and an optocoupler sensor to control the temperature change of the driven disk.

Product descriptionThe clutch drive plate is an advanced mechanical device that can control and adjust the engine output power. It is widely used in mechanical equipment such as automobiles,motorcycle and generator set The clutch drive plate is mainly used to control engine power.Can convert engine power into vehicle movement, start, stop, run, and change engine speed. Thus ensuring the safe operation of mechanical equipment. The clutch drive plate consists of a housing, bearings, friction surface, spring, tightening bolts, friction plate, etc.

Truck clutch featuresSmooth shifting while the car is in motion to adapt to changing driving conditions. Transmissions often need to be shifted into different gears. In order to change gears or other transmission mechanisms, it is usually used to push the gear pair of the original transmission out of the gear. Then let the gear pair on the other gear do the work. Before changing gears, you must depress the clutch pedal to interrupt the transmission and disengage from the original gear. At the same time, the speed of the meshing part of the new gear can be gradually synchronized.

Product DescriptionThe clutch drive plate is an advanced mechanical device that can control and control the engine's power output. Widely used in cars motorcycle generator set and other mechanical equipment The clutch drive plate is mainly used to control the output of engine power, can convert engine power into vehicle movement, start, stop, run and change engine speed, thus ensuring the safe operation of mechanical equipment. The clutch drive plate consists of a housing, bearing, friction surface, spring, retaining bolt, friction plate, etc.

The function of truck clutch:Achieve smooth gear shifting. During the driving process of the car, in order to adapt to the changing driving conditions, the transmission system often needs to change to different gears. To shift gears in a gear transmission, the gears or other shifting mechanisms are generally used to push a certain gear pair of the original gear out of the transmission, and then put the gear pair of another gear into operation.

Product descriptionCeramic brake pads are a new type of friction material. Ceramic brake pads are composed of ceramic fibers, iron-free filler substances, adhesives and a small amount of metal. They have the characteristics of no noise, no dust, and no corrosion of the wheel hub. , long service life, environmental protection and other advantages. Ceramic brake pads are the latest brake pad technology, which have better characteristics than traditional brake pads. Ceramic brake pads are currently only used in some high-end cars or sports cars. Ceramic brake pads change conventional wisdom.

Product descriptionThe clutch pressure plate is an important structure on the clutch, and its function plays an important role in the driving safety of the car. The clutch pressure plate is one of the most important components in the clutch assembly. It transmits and cuts off the engine's power transmission through the linkage mechanism according to the driver's wishes.

Product descriptionA clutch cover, additionally regarded as a grasp housing or snatch case, is a protecting housing that encloses the grab meeting in a vehicle's transmission system. It is usually made of steel or a long lasting composite fabric and is bolted to the transmission housing.The main reason of a clutch cover plate is to guard the seize elements from dust, debris, and exterior harm whilst additionally stopping the grasp assembly from coming aside all through operation.

Product descriptionA clutch cover, also known as a clutch housing or clutch case, is a protective housing that encloses the clutch assembly in a vehicle's transmission system. It is typically made of metal or a durable composite material and is bolted to the transmission housing.The primary purpose of a clutch cover is to protect the clutch components from dust, debris, and external damage while also preventing the clutch assembly from coming apart during operation.

Product descriptionTwin Plate Clutch For Solve idle vibration. Use 55 chromium silicon springs to solve the problems of shaking and broken springs in heavy-duty vehicles. The back cover is laser welded and is not easy to crack.

Product descriptionThe friction clutch pressed by a spring (friction clutch for short) is widely used for clutch pressure plate braking. The torque generated by the engine is transmitted to the driven plate through the friction between the flywheel and the contact surface between the pressure plate and the driven plate. When the driver depresses the clutch pedal, the big end of the diaphragm spring drives the pressure plate to move backward through the transmission of the mechanical parts.

Product description The clutch pressure plate is an important structure of the clutch. And the function of the clutch plate plays an important role in vehicle driving safety. The clutch pressure plate is one of the most important components of the clutch assembly, transmitting or decoupling engine power through a coupling mechanism depending on the driver's needs. It works in conjunction with the clutch plate to make the car start smoothly.

Product descriptionThe clutch pressure plate is one of the essential transmission components of the vehicle. It can press the clutch driven plate onto the flywheel to transmit the engine torque, and in turn, control the rotation of the driven plate. There are generally two types of clutch pressure plate assemblies: with coil springs and with diaphragm springs. The difference between them is the way they press the pressure plate toward and away from the clutch driven plate.