Twin Clutch-manufacture,factory,supplier from China

Clutch working principle:The clutch is installed between the engine and the transmission. It is an assembly in the automobile transmission system that is directly connected to the engine. Usually the clutch is installed together with the flywheel set of the engine crankshaft, and is the component that cuts off and transmits power between the engine and the vehicle's transmission system.

PRODUCT PROCESSSAFETY IS WITH YOUEnsuring your safety even at high-speed or emergency braking.Withthousands of hours dynotestingsimulate differenttemperatures,weather androad conditions.DRILLED AND SLOTTEIThe construction of a brand-newproduction line to producetheir high performance.ALLOY DISCThese two-piece rotors replacethestock one-piece discs of your carwith absolutely nomodifications required.  Product parametersOE NO.1601210-76A, 1601210-76BProduct NameClutch DiscWarranty12 MONTHSQualityHigh-Quality/100% Brand new and High qualityPlace of OriginShandong,CHINAPac

Product descriptionThe automobile clutch drive plate is another component of the clutch. It transmits engine torque to the transmission through friction conversion. Reduce the vibration and shock of the transmission system, and complete the "disengagement" and "engagement" work. The automobile clutch drive plate is an indispensable and consumable part of the manual transmission vehicle.

Product DetailsThe driven plate assembly is composed of friction plates, driven plate hubs and other parts, and is used to transmit engine power to the driven parts of the transmission. The car clutch driven plate is another component of the clutch. Clutch driven discs can be widely used in automobiles. Mechanical equipment such as motorcycles and generator sets can control the start, stop, operation, gear shifting, etc. of the engine to ensure the safe operation of the mechanical equipment.Advantages of disc clutch1.

The driven plate is a clutch hot press leveling deviceHot pressure leveling equipment is mainly composed of mechanical system, hydraulic system, heating device and electrical system. The mechanical system is the main body of the hot press leveling equipment. The hydraulic system is an actuator that enables precise control of pressure. The heating device consists of a resistance wire and an optocoupler sensor to control the temperature change of the driven disk.

The driven plate is necessary for hot pressure leveling of the clutch.The driven plate is one of the key components of the clutch, and the clutch is a transmission device that relies on friction to perform transmission functions. During the clutch manufacturing process, due to the rebound deformation of the material, it is difficult to ensure the flatness of the clutch friction plate. The traditional leveling method is usually manual leveling or cold press leveling.

Product descriptionTwin Plate Clutch For Solve idle vibration. Use 55 chromium silicon springs to solve the problems of shaking and broken springs in heavy-duty vehicles. The back cover is laser welded and is not easy to crack.

Product DescriptionTwin Clutch for XCMG uses 65m heat-treated steel plate, which is strong, durable and heat-set. The corrugated plate is laser-bent, allowing for smooth starting and shifting to reduce clutch damage. The splines are quenched and tempered in a vacuum furnace to make the pre-shock absorbing structure more sensitive and firm, eliminating idling vibration. Using 55 chromium silicon to solve the problems of shaking and broken springs in heavy-duty vehicles. The back cover is laser welded and is not easy to crack.

Product UsageShandong Litong Clutch Manufacturing Co., Ltd. relies on its own industrial chain advantages and has been deeply involved in the field of special clutches for mining wide-body vehicles for many years. With a professional technical team and stable and excellent product quality, it has been recognized and trusted by many well-known domestic wide-body vehicle manufacturers. It has completely replaced imported products in the research and development of high-power and high-torque clutches.

Product DescriptionThe clutch driven plate requires a certain amount of friction to ensure sufficient power transfer. At the same time, certain wear resistance and high temperature resistance are also required to ensure long-term reliability.The design and performance of the clutch driven plate directly affects the operating effectiveness and lifespan of the clutch, so when using or maintaining the clutch, it is necessary to pay attention to the degree of wear and friction of the clutch plate.

Product descriptionClutch Structure: A clutch mainly consists of a control part, a transmission part, contacts, friction plates, etc. All of these work together to make the clutch work efficiently.Working principle: The clutch controls the movement through the controller and connects the transmission part with the contact point. Therefore, power from the engine is sent to the drive system.

Product descriptionThe clutch is located in the flywheel housing between the engine and transmission. Protects the transmission system from overload. When the car brakes suddenly, it will decelerate rapidly, because without the clutch the engine is tightly connected to the transmission. Therefore, all moving parts experience significant inertia. This can cause the load on the drivetrain to exceed its load capacity. This can damage mechanical parts, but clutches eliminate this danger by taking advantage of the relative motion that can occur between the actuating and driven parts of the clutch.

Product descriptionA clutch is similar to a switch, engaging or disengaging power transmission. The active part and the driven part of the clutch mechanism can be temporarily separated, and can be gradually connected, and may also rotate relative to each other during the transmission process. There cannot be a rigid connection between the driving part and the driven part of the clutch.

Product UsageThe clutch is mainly composed of four parts: the active part, the driven part, the pressing part and the operating mechanism. The clutch plate we usually call belongs to the driven part. Its working principle is also very simple, which relies on the principle of friction to transmit engine power.

Product descriptionThe clutch driven plate is an advanced mechanical device that can control and regulate engine power output. Widely used in automobiles, motorcycles, generator sets and other mechanical equipment. The clutch driven plate consists of a housing, bearings, friction surfaces, springs, fastening bolts, friction plates, etc.

Introduction to automobile clutchThe automobile clutch is located in the flywheel housing between the engine and the gearbox. The clutch assembly is fixed on the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the gearbox.

Product descriptionThe clutch drive plate is a precision mechanical device that controls and regulates engine power and is a component of the clutch Clutch transmission plates are widely used in mechanical equipment such as automobiles, motorcycles. generators, and are mainly used to control engine output. It transmits engine torque to the transmission through friction conversion. Helps reduce vibration and shock in the transmission system. Converts engine power into vehicle motion. Starts, stops, drives and accelerates the engine. and guarantee the safe operation of mechanical equipment.

The clutch has three main functions: Ensure the car starts smoothly. This is the primary function of the clutch. Before the car starts, it is natural to start the engine. When the car starts, the car gradually accelerates from a completely stationary state. If the drive train (which connects the entire car) is rigidly connected to the engine, the car will suddenly rush forward as soon as the transmission is put into gear, but it will not start.Prevent the overload of the transmission system.

Product functionThe driven plate can also be called the rear pressure plate, which gives a force to the clutch friction plate from behind, causing the friction plate to move forward slightly and compress the driving plate (front pressure plate, flywheel) to transmit power.

Product detailsThe clutch is an important component required in the vehicle transmission system, and the automobile clutch driven plate is an important wear component of manual transmission cars.

Product descriptionThe clutch pressure plate is an important structure on the clutch, and its function plays an important role in the driving safety of the car. The clutch pressure plate is one of the most important components in the clutch assembly. It transmits and cuts off the engine's power transmission through the linkage mechanism according to the driver's wishes.

Product DescriptionThe clutch release bearing, also known as the release bearing, is an important part of the manual transmission system. Its main function is to engage and disengage the clutch by pressing the release finger on the clutch pressure plate.The clutch release bearing facilitates the engagement and separation of the clutch and plays an important role in the smooth operation of the clutch system. Regular inspection and maintenance of the release bearing will help prevent premature wear and ensure optimal performance of your manual transmission.  Product advantages1.

Product descriptionThe clutch is one of the important assemblies that make up the power train. The clutch driven plate is an important transmission component between the automobile engine and the gearbox. Its main function is to transmit the torque of the engine and cut off the power when starting and shifting gears. The clutch driven plate is another component of the clutch. It transmits the engine torque to the transmission through friction conversion, reduces the vibration and impact of the transmission system, and completes the "disengagement" and "engagement" tasks.

Clutch driven plate structureA clutch driven plate consists of a housing, bearings, friction surfaces, springs, fastening bolts, friction plates, etc. The friction surface is mainly used to transmit the engine power to the shaft, the spring is used to push the friction plate to rotate, and the friction surface realizes the engine output.The clutch pressure plate is attached to the engine flywheel and rotates with the engine. The driven plate (friction plate) is splined to the transmission input shaft via a spline groove.